by

It will take a few more months before delivery, but then a classic for the now popular epoch IV in gauge 1 will be available.

by

MarGe Models has new products for modern truck transportation and agriculture.

by

There are suitable tractor units and semi-trailers in high quality for the road transportation of containers in gauge 1:32. A report with 52 photos.

by

Since the 1970s, ISO containers have become increasingly popular in intermodal transport. Today, the majority of goods are transported in containers. Unfortunately, the topic was largely ignored in 1-gauge. But now there are inexpensive, modern containers and vehicles for road transportation.

by

Already available next week are some novelties from MarGe Models for modern road traffic, agriculture and loading scenes.

by

MarGe Models is shipping some new trucks and tractors for the current epoch VI to fit gauge 1 models.

by

MarGe Models from the Netherlands is constantly developing new modern truck models in 1/32nd scale. With two trucks, hurry is the order of the day.

by

MarGe Models has new modern trucks in the pipeline - and really long trailers that are shaping the 21st century's roads.

by

Modern railways are no longer a pure niche topic for gauge 1. Modern commercial vehicles are needed as cargo and for road scenes. The Volvo FH16 750 truck from MarGe Models is the first in 1:32. 34 pictures of a fine truck model.

by

MarGe Model in Zwolle, the Netherlands, has manufactured a 1:32 scale Mercedes-Benz Sprinter van in China. The model comes in a glossy black box and has a Daimler license, but no specific designation. On the rear side 316 CDI can be read under the magnifying glass. It must be the W 906 built between 2006 and 2013. It is also available as Dodge Sprinter with a slightly modified radiator grille.

The almost 19 cm model has a die-cast body and a plastic chassis. The headlights, rear lights and vents are also made of plastic, as are the interior fittings of the driver's cab. The steering wheel rotates against the direction of travel of the steering axle. The buttons and knobs on the dashboard are delicately printed. The rubber tyres are finely profiled.

All doors are movable. The sliding door can be opened with a handle under the car floor. For the four doors with a minimal gap, a kind of plastic crowbar is included to open the doors. With this aid it is easier to reach into the door handles than with your fingernails. The hinges of the rear doors are somewhat coarser than on the original - this is the only way with injection moulding.

The loading space is painted from the inside and invites to loading scenes. The mirrors are equipped with mirror foil, the side fenders are plastic parts. A spare wheel is mounted under the floor of the car. The step can be replaced by an enclosed towing hook. License plates for ten European countries are also included.

I can highly recommend this model. In silver, black and white, the Sprinter costs 67 €, with Veenhuis, Nooteboom or Claas printing € 69,95.

The high-gloss finish was a particular challenge when photographing. Of course, everything is reflected, you have to work with large light shapers like automobiles. And if you move the flash units, there will be differences like in pictures 6 and 7. This slightly cloudy varnish is also found in the products of the automotive industry, but the effect is greatly increased on the model. The railway industry paints locomotives, multiple units and coaches glossy. But I now understand that the model railway industry prefers to use matt to semi-matt paints. As the Sprinter model demonstrates, even the smallest dust particles and fingerprints become visible. They are easy to remove, but they are not fun to photograph, clean or digitally edit.

MarGe Models